$174.96
Choose options
$174.96
$174.96
Features
- Smoked or clear lens
- Built in turn signals
- 4 programmable functions (optional)
- Plug and play wiring
- 20 minute installation
- 80 superbright LEDs
- Includes FREE 3-link exhaust lowering kit for better tail light visibility
Description
This TST Industries taillight system does away with the ugly stock light and signals assembly and is a direct fit within the tail so the installation is a snap (requires trimming off a little of that black plastic closeout under the tail). The new programmable version features the regular brake and signal functions of our original light and adds the option for having a scanning signal and strobe brake. The selector switches are built into the housing of the taillight in a location that remains accessible after installation.
This is our own design, a product of American engineering, and is sold only through our stores and a few authorized dealers. Super Street Bike magazine featured this product in their "Mod of the Month" article in April 2012 (see article in our photos).
FLASH RATE: An LED Flasher Relay or Load Balancing Resistors are needed for this tail light to flash properly. If you don't already have an LED Flasher Relay installed on your bike and you want to avoid the hassle of wiring in load balancing resistors, check out our plug-and-play TST Gen2 LED Flasher Relay and ensure your new LED lighting works properly. Still not sure if you want an LED Flasher Relay or Load Balancing Resistors? CLICK HERE to learn more!
NON U.S. BUYERS: If you are purchasing an LED flasher relay, please verify the pin configuration before purchasing. North American models models require a two pin flasher relay, but some international models require a four pin flasher relay. It is your responsibility to verify fitment of these items before making your purchase.
Please note this item is not DOT approved and may not comply with the laws and regulations in your area. See our Terms & Conditions for more information.
Free Exhaust Lowering Link Kit Application Chart
NOTE: This kit does NOT include an exhaust mount. Exhaust mounts are included with your exhaust purchase and must be purchased from the exhaust manufacturer.
Each order includes our 3 link kit, but you may only need 2 links for installation. Reference this chart to find out how many links to use during your installation!
| Exhaust | Links Used |
| Yoshimura RS-5 | 3 Link |
| Honda Stock | 3 Link |
| Toce | 2 Link |
| Two Brothers | 2 Link |
| Jardine | 2 Link |
| Akrapovic | 3 Link |
| Leo Vince | 3 Link |
| HyperFlo | 2 Link |
| G and G | 2 Link |
| MIVV X-Cone | 2 Link |
| KR Tuned | 2 Link |
Don't see your exhaust on this list? If your exhaust has a midpipe mount, then you will utilize all 3 included links. Otherwise, only 2 links are used.
Installation
Programmable Instructions
Feature Video
Features
- Smoked or clear lens
- Built in turn signals
- 4 programmable functions (optional)
- Plug and play wiring
- 20 minute installation
- 80 superbright LEDs
- Includes FREE 3-link exhaust lowering kit for better tail light visibility
Description
This TST Industries taillight system does away with the ugly stock light and signals assembly and is a direct fit within the tail so the installation is a snap (requires trimming off a little of that black plastic closeout under the tail). The new programmable version features the regular brake and signal functions of our original light and adds the option for having a scanning signal and strobe brake. The selector switches are built into the housing of the taillight in a location that remains accessible after installation.
This is our own design, a product of American engineering, and is sold only through our stores and a few authorized dealers. Super Street Bike magazine featured this product in their "Mod of the Month" article in April 2012 (see article in our photos).
FLASH RATE: An LED Flasher Relay or Load Balancing Resistors are needed for this tail light to flash properly. If you don't already have an LED Flasher Relay installed on your bike and you want to avoid the hassle of wiring in load balancing resistors, check out our plug-and-play TST Gen2 LED Flasher Relay and ensure your new LED lighting works properly. Still not sure if you want an LED Flasher Relay or Load Balancing Resistors? CLICK HERE to learn more!
NON U.S. BUYERS: If you are purchasing an LED flasher relay, please verify the pin configuration before purchasing. North American models models require a two pin flasher relay, but some international models require a four pin flasher relay. It is your responsibility to verify fitment of these items before making your purchase.
Please note this item is not DOT approved and may not comply with the laws and regulations in your area. See our Terms & Conditions for more information.
Free Exhaust Lowering Link Kit Application Chart
NOTE: This kit does NOT include an exhaust mount. Exhaust mounts are included with your exhaust purchase and must be purchased from the exhaust manufacturer.
Each order includes our 3 link kit, but you may only need 2 links for installation. Reference this chart to find out how many links to use during your installation!
| Exhaust | Links Used |
| Yoshimura RS-5 | 3 Link |
| Honda Stock | 3 Link |
| Toce | 2 Link |
| Two Brothers | 2 Link |
| Jardine | 2 Link |
| Akrapovic | 3 Link |
| Leo Vince | 3 Link |
| HyperFlo | 2 Link |
| G and G | 2 Link |
| MIVV X-Cone | 2 Link |
| KR Tuned | 2 Link |
Don't see your exhaust on this list? If your exhaust has a midpipe mount, then you will utilize all 3 included links. Otherwise, only 2 links are used.
Installation
Programmable Instructions
Feature Video
From the garage to the street.
Rep TST: Shop ourMerch Collection
Let customers speak for us
Install video was on point for these lights on my bike. These lights make the bike look like it should have from the factory. Easy to put it and fit flawless. I also paired with the rear lights with the red running lights and their amazing.
Caen excelente, Tienes 2 opciones o las dejas que se queden prendida o las pones con las señales
Extremely easy install. No videos needed if you have common sense. Just simple plug and play.
Works great fits perfect highly recommended!!!!!!!
Very easy install been running this product for 1 month and haven’t had any problems
Very easy install been running this product for 1 month and haven’t had any problems
2006 cbr 600rr went down in a crash with these at 70mph.
1) i saw the damage the sliders took, they literally saved my forks.. my forks didnt take any nick scrape, dings, nothing bent. I mean NOTHING on my forks were damaged.
2) When disassembling the sliders, the axle nut they provide im this kit was broken. Meaning the crash was so much more violent than you can imagine. And these things did their job, held up, and protected my forks?!?!
This has been crash test verified now.
I also had the engine cover crash protector and the frame sliders from TST, they all did their job!
2006 cbr 600rr, I've bought these flush lights a couple of times over the past 6 years(give or take) and the design has changed a bit. At first I was hesitant when I received a different style, but the moment I went to install it. Oh thank you sweet baby jesus. They made it easier to install, and the lights mounted actually look better than the old style, and it appears they refined it. Another banger tst product that delivered!
2006 cbr 600rr, followed the TST video instructions and had not issue. My lights work flawlessly and give no issue or problem at all and I like it that way. This was a great and actually necessary buy. It truly did fix the flashing speed and weird behavior of the lights.
Ok, I went down in a crash, 2006 cbr 600rr. A few things:
1) these sliders work wonderfully and as they should.
2) they held up and had alot of slider left, and I was still able to get the bolt to remove the destroyed slider. (Meaning the Quality control is amazing)
3) the crash was at approx 70mph and the bike dragged for very very far. But the frame did not bend at all. There was NO frame damage at all. Not even a scrape!
4) there is no doubt in my mind without these sliders my bike would have been screwed. The extra leverage even prevented my radiator from getting obliterated.
If you're thinking about them? Get it.. they worked perfectly, So I bought another set because hell yeah.
I actually went down with this engine cover crash protector on. It 100% protected my engine cover. The amount of road that still met the protector was wild. And yes I have axle slider both for the rear and front and i have frame sliders as well. If your on the fence with getting these. Or if you think they won't add protection. Get that out of your head now. Remember a crash is violent, twist and turns, and momentum and motion doesnt care about your perceived thoughts. This was the cheapest purchase that prevents a 300+ oem cover replacement. I will by buying another one.
Upgraded the bulbs in my turn signals to LED on my 2018 DR650. All flashed at the same time when turning indicators on to either side. This solved the problem and installs in under five minutes for the cost of two cups of Starbucks.
I've bought several products from TST and everything has been exceptional. This time around I bought the TST brake light modulator type 1 for my 2021 Kawasaki Vulcan S 650. Love the plug and play, and it works simply amazing.
Compared to some cheap $50 Amazon ones these will definitely save your bike was worth every penny took a little bit to install because I wanted to be careful and make sure it fit properly. Make sure you watch the video they have before you try and put these on.
Installed these today along with the tail light and low tag mount. Great product super bright and matching the scanning of the tail light!! Make sure to get the flasher relay to keep your turns blinking properly though. All of their install videos are spot on making it a simple change.
